Loctite® PL Premium® FAST GRAB Polyurethane Construction Adhesive

Ultimate strength with less bracing. Weather and waterproof.

Overview

Loctite® PL Premium® FAST GRAB Polyurethane Construction Adhesive is a revolutionary construction adhesive that provides superior results and is safe to use. It may be used inside or outside and will last as long as the surface it joins together. Loctite® PL Premium® FAST GRAB is 100% polyurethane and is 8 times stronger than traditional construction adhesives. It has superior Initial Grab than our Original PL Premium® Formulation, is still repositionable and is VOC compliant for sale in all 50 states.

Recommended For

Features & Benefits

Feature

Benefit

8X Stronger Than Ordinary Construction Adhesive, Fast Grab

Compared to Original Formula, holds objects quickly, no bracing is required

Virtually VOC Free

< 2 % by weight

Meets and exceeds APA AFG-01 specs

Can be applied directly to wet, frozen or treated lumber

High strength

Stronger than many substrates it joins together; Up to 8 times the strength of conventional adhesives

Water resistant

Can be used outdoors; Ideal for humid areas

Low odor

No strong solvent odor; Excellent for indoor projects

Twice the cover

Less adhesive required due to the expansion of the adhesive as it cures

Long open time

Extended repositioning time

Directions for Use

Safety Precautions

Wear gloves. Cured adhesive on bare skin will not come off immediately with washing and will cause skin to darken. Cured adhesive and discoloration will come off in about 3 days.

Preparation

Use above 5°C (40°F). Surfaces must be clean and free of frost, standing water, grease, dust and other contaminants. Pre-fit all materials and protect finished surfaces. Cut nozzle at a 45° angle to desired bead size and puncture inner seal. Be very careful not to allow PL Premium® FAST GRAB to cure on a finished surface.

Application

Apply adhesive to one surface of the material being bonded. Press the surfaces firmly together. Materials may be repositioned within 20 minutes after applying the adhesive. If bonding two non-porous surfaces (such as foam, metal and fiberglass), add water in the form of a very light or atomized spray from a plant mister bottle to the extruded adhesive. The repositioning time will then be reduced to less than 15 minutes. Use mechanical support for 24 hours while the adhesive cures.

Cleanup

Clean tools and adhesive residue immediately with mineral spirits. Loctite® PL Premium® FAST GRAB must be removed mechanically once cured.