Loctite® Super Glue Precision Pen

Clean, Precise, Easy to Use

Porous or non-porous surfaces and vertical applications that benefit from clean, precise, and easy-to-use, dispensing.


Loctite Super Glue Precision Pen is clean, precise, and easy-to-use. The intuitive pen-shaped applicator allows for frustration free dispensing with patented side squeeze grips that provide optimal precision when gluing. Loctite Super Glue Precision Pen outperforms ordinary super glues with its patented gel formula that eliminates running and dripping on vertical surfaces. It works on a variety of porous and non-porous surfaces, which means the Loctite super glue goes where you want it, when you want it, and bonds permanently. Loctite Super Glue Precision Pen is resistant to moisture, most chemicals, and freezing temperatures.

Recommended For

Features & Benefits



Intuitive pen applicator

Easy to use, no mess, pinpoint accuracy

Gel formula

Ideal for vertical and porous surfaces

Dries transparent

Invisible repairs

Sets in seconds

No clamping required

Directions for Use

Safety Precautions

Use in a well-ventilated area. Protect work area. Wash hands after use.

Tools Typically Required

Tissue paper


Surfaces to be bonded must be close fitting, clean, dry and free from oil, wax and paint. Protect work area. For best results, lightly roughen smooth surfaces. Pre-fit parts to be joined. To puncture nozzle, turn cap clockwise until clicking sound stops. Unscrew cap counterclockwise.


Squeeze side grips for precision dispensing. Apply sparingly to one surface - only one drop of adhesive per square inch of surface is required. Press parts together immediately and hold for at least 15-30 seconds. Do not attempt to reposition the parts.
Immediately after use, clean tip with tissue and replace cap. For increased strength, leave the parts undisturbed for at least 5 minutes. Full cure in 24 hours. Note: Cure time is dependent upon temperature, humidity, porosity of surfaces and amount of adhesive applied.


To ensure non-clog tip, simply wipe with tissue and snap cap on container for safe storing. After cleaning, wet any tissue used for wiping off glue with water and dispose of. When cleaning up larger quantities of uncured adhesive, apply water and allow to cure and then scrape up. Note this may result in damage to the surfaces. Cured adhesive may be cut away with caution using a sharp blade, removed with acetone or with boiling water.
Note: Acetone is highly flammable and may not be suitable for use on all materials, test surface first. Follow manufacturer's instructions.