Loctite® Super Glue ULTRA Gel Control™

Our Most Durable, Impact Resistant Super Glue

Super-tough, durable bonds that resist weather, impact, shock and vibration.

Overview

Loctite® Super Glue ULTRA Gel Control™ is a specially formulated rubber toughened instant adhesive that resists impact, shock, vibration and temperature extremes. It is ideal for bonds subject to daily use and harsh conditions. The Rubber Toughened Formula is also Outdoor Safe and gives more time to align pieces before the glue takes hold. Loctite® Super Glue ULTRA Gel Control™ comes in a patented side-squeeze design for maximum control and air-tight storage. It dries clear and sets without clamping. Loctite® Super Glue ULTRA Gel Control™ is resistant to moisture and freezing temperatures.

Recommended For

Features & Benefits

Feature

Benefit

Rubber toughened formula

Great for applications requiring high flexibility

Gel formulation

No mess, no drip formula; Ideal for vertical applications

Dries transparent

Invisible repairs

Sets in seconds

No clamping required

Easy squeeze grips

Pinpoint accuracy, easy to use

Locking cap collar

Prevents leaks and drying out

Directions for Use

Safety Precautions

Wear gloves. Protect work area.

Preparation

Surfaces to be bonded must be close fitting, clean, dry and free from oil, wax and paint. For best results, lightly roughen smooth surfaces. Pre-fit parts to be joined.

Application

To puncture the nozzle, screw the cap clockwise continuously into the base until the clicking sound stops. Unscrew the cap counter clockwise to open the bottle. Squeeze the blue side grips to dispense the adhesive. Only one drop of adhesive per square inch of surface is required. Press surfaces together immediately and hold for 60 seconds. Do not attempt to reposition the parts. Immediately after use, clean tip with tissue and replace cap. For increased strength, leave the parts undisturbed for at least 10 minutes. Full cure in 24 hours. Note: Cure time is dependent upon temperature, humidity, porosity of surfaces and amount of adhesive applied.

Cleanup

Cured adhesive may be cut away with caution using a sharp blade, removed with mineral spirits or with boiling water.