Loctite® Super Glue ULTRA Gel Control™ is a specially formulated rubber toughened instant adhesive that resists impact, shock, vibration and temperature extremes. It is ideal for bonds subject to daily use and harsh conditions. The Rubber Toughened Formula is also Outdoor Safe and gives more time to align pieces before the glue takes hold. Loctite® Super Glue ULTRA Gel Control™ comes in a patented side-squeeze design for maximum control and air-tight storage. It dries clear and sets without clamping. Loctite® Super Glue ULTRA Gel Control™ is resistant to moisture and freezing temperatures.

Recommended For

• Repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
• Ideal for vertical surfaces and for applications requiring flexibility
• Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglas™, polycarbonate, polystyrene and PVC

Not Recommended For

• Polyethylene, polypropylene, PTFE, silicone rubber, polystyrene foams or glass
• Bonding assemblies which will hold hot liquids
• Use in dishwasher, oven or microwave

Feature		Benefit
Rubber toughened formula		Great for applications requiring high flexibility
Gel formulation		No mess, no drip formula; Ideal for vertical applications
Dries transparent		Invisible repairs
Sets in seconds		No clamping required
Easy squeeze grips		Pinpoint accuracy, easy to use
Locking cap collar		Prevents leaks and drying out

Safety Precautions

Wear gloves. Protect work area.

Preparation

Surfaces to be bonded must be close fitting, clean, dry and free from oil, wax and paint. For best results, lightly roughen smooth surfaces. Pre-fit parts to be joined.

Application

To puncture the nozzle, screw the cap clockwise continuously into the base until the clicking sound stops. Unscrew the cap counter clockwise to open the bottle. Squeeze the blue side grips to dispense the adhesive. Only one drop of adhesive per square inch of surface is required. Press surfaces together immediately and hold for 60 seconds. Do not attempt to reposition the parts. Immediately after use, clean tip with tissue and replace cap. For increased strength, leave the parts undisturbed for at least 10 minutes. Full cure in 24 hours. Note: Cure time is dependent upon temperature, humidity, porosity of surfaces and amount of adhesive applied.

Cleanup

Cured adhesive may be cut away with caution using a sharp blade, removed with mineral spirits or with boiling water.